PP irrigation pipe

PP irrigation pipes carry water through agricultural and landscape distribution networks. Pipe dimensions, pressure class and compatible fittings should be selected to match the irrigation design.

An irrigation pipe needs to carry the required water flow and withstand the pressure produced by the pump and changes in elevation. For a PP system, check the actual polypropylene grade, wall thickness and connection method before choosing the product.

The pipe, fittings, valves and irrigation outlets need to work together as one system. Confirm the model's intended use, temperature limits and exposure conditions before installation.

· Pipe selection based on irrigation flow and pressure

· Dimensions and fittings matched to the selected model

· Joint method defined by the supplied system

· Agricultural water distribution where approved for the selected model

· Landscape watering where the model and exposure conditions are suitable

· Confirm the material grade and intended irrigation application before ordering.

· Use only the joint method and compatible fittings specified for the actual model.

· Check pressure, temperature and above-ground or buried installation limits.

· Flush and test the completed network using the approved project procedure.